3Frame a photograph, focus, and shoot.

The camera will vary Active D-Lighting shot-by-shot according to the bracketing program selected. While bracketing is in effect, a bracketing progress indicator will be displayed in the control panel. A segment will disappear from the indicator after each shot: the y segment when the first shot is taken, the 0segment when the second shot is taken, and the 1segment when the third shot (if applicable) is taken.

To cancel bracketing, press the D button and rotate the main command dial until the bracketing progress indicator and dicon are no longer displayed.

AADL Bracketing

In continuous low speed and continuous high speed release modes (0 78), shooting will pause after the number of shots specified in the bracketing program have been taken. Shooting will resume the next time the shutter-release button is pressed. In self-timer mode, the camera will take the number of shots selected in Step 2 on page 114 each time the shutter-release button is pressed, regardless of the option selected for Custom Setting c3 (Self-timer) > Number of shots (0 214). In other release modes, one shot will be taken each time the shutter-release button is pressed.

If the memory card fills before all shots in the sequence have been taken, shooting can be resumed from the next shot in the sequence after the memory card has been replaced or

shots have been deleted to make room on the memory card. If the camera is turned off Z before all shots in the sequence have been taken, bracketing will resume from the next shot

in the sequence when the camera is turned on.

115