Nikon D7000, D7000 (Body Only) lFlash Photography, Using the Built-inFlash, ❚❚Using the Built-inFlash: i, k, p, n, o, s, and wModes, ❚❚ Using the Built-inFlash: P, S, A, M, and 0Modes

lFlash Photography

Using the Built-in Flash

The built-in flash has a Guide Number (GN) 12/39 (m/ft., ISO 100, 20 °C/68 °F) and provides coverage for the angle of view of a 16 mm lens. It can be used not only when natural lighting is inadequate but to fill in shadows and backlit subjects or to add a catch light to the subject’s eyes.

❚❚Using the Built-in Flash: i, k, p, n, o, s, and wModes

1Choose a flash mode (0 144).

2Take pictures.

The flash will pop up as required when the shutter-release button is pressed halfway, and fire when a photograph is taken. If the flash does not pop up automatically, DO NOT attempt to raise it by hand. Failure to observe this precaution could damage the flash.

❚❚ Using the Built-in Flash: P, S, A, M, and 0Modes

1 Raise the flash.

Press the M button to raise the flash.

2	Choose a flash mode (0 144).
3	Take pictures.	l
	The flash will fire whenever a picture is taken.	Mbutton

ALowering the Built-in Flash

To save power when the flash is not in use, press it gently downward until the latch clicks into place.

143