❚❚Vibration Reduction (VR)
To use vibration reduction, slide the VR switch to ON. Vibration X reduction is activated when the
pressed halfway, reducing the effects of camera shake on the image in the viewfinder and simplifying the process of framing the subject and focusing in both autofocus and manual focus modes. When the camera is panned, vibration reduction applies only to motion that is not part of the pan (if the camera is panned horizontally, for example, vibration reduction will be applied only to vertical shake), making it much easier to pan the camera smoothly in a wide arc.
Vibration reduction can be turned off by sliding the VR switch to OFF. Turn vibration reduction off when the camera is securely mounted on a tripod, but leave it on if the tripod head is not secured or when using a monopod.
ADetaching the Lens
Be sure the camera is off when removing or exchanging lenses. To remove the lens, press and hold the lens release button (q) while turning the lens clockwise (w). After removing the lens, replace the lens caps and camera body cap.
DCPU Lenses with Aperture Rings
In the case of CPU lenses equipped with an aperture ring (0 269), lock aperture at the minimum setting (highest
DVibration Reduction
Do not turn the camera off or remove the lens while vibration reduction is in effect. If power to the lens is cut while vibration reduction is on, the lens may rattle when shaken. This is not a malfunction, and can be corrected by reattaching the lens and turning the camera on.
Vibration reduction is disabled while the
26