Nikon D7000, D7000 (Body Only) ❚❚Commander Mode

❚❚Commander Mode

Use the built-in flash as a master flash controlling one or more remote optional SB-900, SB-800, SB-700, SB-600, or SB-R200 flash units in up to two groups (A and B) using advanced wireless lighting.

Selecting this option displays the menu shown at right. Press 4 or 2 to highlight the following options, 1 or 3 to change.

Option		Description
Built-in	Choose a flash mode for the built-in flash (commander flash).
flash
TTL	i-TTL mode. Choose flash compensation from values between +3.0 and –3.0 EV in
	increments of 1/3	EV.
M	Choose the flash level from values between 1/1 and 1/128 (1/128 of full power).
– –	The built-in flash does not fire, although remote flash units do. The built-in flash
	must be raised so that it can emit monitor pre-flashes.
Group A Choose a flash mode for all flash units in group A.
TTL	i-TTL mode. Choose flash compensation from values between +3.0 and –3.0 EV in
	increments of 1/3	EV.
	Auto aperture (available only with SB-900 and SB-800 flash units). Choose flash

AAcompensation from values between +3.0 and –3.0 EV in increments of 1/3 EV. M Choose the flash level from values between 1/1 and 1/128 (1/128 of full power).

–– The flash units in this group do not fire.

Choose a flash mode for all flash units in group B. The options available are the Group B same as those listed for Group A, above.

Choose from channels 1–4. All flash units in both groups must be set to the same Channel channel.

U

225