Flash Compensation
(P, S, A, and M Modes Only)
Flash compensation is used to alter flash output by from
Press the Y button and rotate the
Ybutton
At values other than ±0.0, a Yicon will be displayed in the control panel and viewfinder after you release the Y button. The current value for flash compensation can be confirmed by pressing the Y button.
Normal flash output can be restored by setting flash compensation to ±0.0. Flash compensation is not reset when the camera is turned off.
±0 EV
(Ybutton pressed)
+1.0 EV
AOptional Flash Units
Flash compensation is also available with optional
ASee Also
l For information on choosing the size of the increments available for flash compensation, see Custom Setting b2 (EV steps for exposure cntrl., 0 211). For information on automatically varying flash level over a series of shots, see page 0 109.
148