Nikon D7000, D7000 (Body Only) ❚❚Copying White Balance from d-0to Presets d-1–d-4, ❚❚Copying White Balance from a Photograph (d-1–d-4Only), d-0, Copy, White balance, Preset manual

❚❚Copying White Balance from d-0 to Presets d-1–d-4

Follow the steps below to copy a measured value for white balance from d-0 to any of the other presets (d-1–d-4).

1 Select L(Preset manual). Gbutton

Press the G button and select White balance in the shooting menu. Highlight Preset manual and press 2.

2 Select a destination. Wbutton

Highlight the destination preset (d-1 to d-4) and press W.

3Copy d-0 to the selected preset.

Highlight Copy d-0and press J. If comment has been created for d-0 (0 129), the comment will be copied to the comment for the selected preset.

❚❚Copying White Balance from a Photograph (d-1–d-4 Only)

Copy a value for white balance from an existing image to a selected preset. Note that r existing values can not be copied to preset d-0.

1Select L(Preset manual).

Highlight Preset manual in the white balance menu and press 2.

2 Select a destination. Wbutton

Highlight the destination preset (d-1 to d-4) and press W.

126