Nikon D7000, D7000 (Body Only) ❚❚“Clean at Startup/Shutdown”, 2Select an option, Clean image sensor, Clean at startup/shutdown, 1Select Clean at startup/shutdown

❚❚“Clean at Startup/Shutdown”

Choose from the following options:

	Option	Description
5 Clean at startup		The image sensor is automatically cleaned each time the camera is turned
		on.
	Clean at	The image sensor is automatically cleaned during shutdown each time
6 shutdown		the camera is turned off.
7	Clean atstartup	The image sensor is cleaned automatically at startup and at shutdown.
	& shutdown
8	Cleaning off	Automatic image sensor cleaning off.

1Select Clean at startup/shutdown.

Display the Clean image sensor menu as

described in Step 2 on the previous page. Highlight Clean at startup/shutdown and press 2.

2Select an option.

Highlight an option and press J.

DImage Sensor Cleaning

Using camera controls interrupts image sensor cleaning. Image sensor cleaning may not be performed at startup if the flash is charging.

Cleaning is performed by vibrating the low-pass filter. If dust can not be fully removed using the options in the Clean image sensor menu, clean the image sensor manually (0 286) or consult a Nikon-authorized service representative.

If image sensor cleaning is performed several times in succession, image sensor cleaning may be temporarily disabled to protect the camera’s internal circuitry. Cleaning can be performed again after a short wait.

n

285