Nikon D7000, D7000 (Body Only) Attach a Lens, camera body cap, 3 Attach the lens, Turn the camera off, 1Turn the camera off, 2 Remove the rear lens cap and the

Attach a Lens

Care should be taken to prevent dust from entering the camera when the lens is removed. The lens generally used in this manual for illustrative purposes is an AF-S DX NIKKOR 18–105mm f/3.5–5.6G ED VR.

Focal length scale	Mounting mark
	Focal length mark
Lens hood (0317)	X
	CPU contacts (0269)
Lens cap
	Rear lens cap
	A-M switch (see below)
	VR (vibration reduction) switch (026)
Zoom ring	Focus ring (055, 99)

1Turn the camera off.

2 Remove the rear lens cap and the	q w
camera body cap.

3 Attach the lens.

Keeping the mounting mark on the lens aligned with the mounting mark on the camera body, position the lens in the camera’s bayonet mount (q). Being careful not to press the lens- release button, rotate the lens counter-clockwise until it clicks into place (w).

Slide the A-Mswitch to A (autofocus; if the lens has an M/A-Mswitch, select M/A for autofocus with manual override).

25