Insert a Memory Card

The camera stores pictures on Secure Digital (SD) memory cards (available separately; 0 319). The camera has two memory card slots (Slot 1 and Slot 2); if you will be using only one memory card, insert it in Slot 1 (0 30).

1 Turn the camera off.

X

 

AInserting and Removing Memory Cards

Always turn the camera off before inserting or removing memory cards.

2 Open the card slot cover.

Slide the card slot cover out (q) and open the card slot (w).

3 Insert the memory card.

Holding the memory card as shown at right, slide it in until it clicks into place. The memory card access lamp will light for a few seconds.

DInserting Memory Cards

Inserting memory cards upside down or backwards could

Access lamp

damage the camera or the card. Check to be sure the card is in

 

the correct orientation.

 

Close the memory card slot cover. If this is the first time the memory card will be used in the camera or the card has been formatted in another device, format the card as described on page 32.

GB 4

Front

29