DRecording Movies
Flicker, banding, or distortion may be visible in the monitor and in the final movie under fluorescent, mercury vapor, or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame (flicker and banding can be reduced by choosing a Flicker reduction option that matches the frequency of the local AC power supply;
0 237). Bright light sources may leave
Recording ends automatically if the lens is removed or when the mode dial is rotated.
Live view may end automatically to prevent damage to the camera’s internal circuits; exit live view when the camera is not use. Note that the temperature of the camera’s internal circuits
may rise and noise (bright spots,
•The ambient temperature is high
•The camera has been used for extended periods in live view or to record movies
•The camera has been used in continuous release mode for extended periods
If a warning is displayed when you attempt to start live view or movie recording, wait for the internal circuits to cool and then try again.
Shutter speed and ISO sensitivity are adjusted automatically unless On is selected for Manual movie settings (0 60) and the camera is in mode M.
DThe
A count down will be displayed 30 s before movie recording ends automatically (0 49). Depending on shooting conditions, the timer may appear immediately when movie recording begins. Note that regardless of the amount of recording time available, live view will still end automatically when the timer expires. Wait for the internal circuits to cool before resuming movie recording.
59