Nikon D7000, D7000 (Body Only) On (Auto reset), b3: Easy Exposure Compensation

b3: Easy Exposure Compensation Gbutton ➜ ACustom Settings menu

This option controls whether the Ebutton is needed to set exposure compensation (0 107). If On (Auto reset) or On is selected, the 0 at the center of the exposure display will blink even when exposure compensation is set to ±0.

Option Description

Exposure compensation is set by rotating one of the command dials (see

note below). The setting selected using the command dial is reset when K On (Auto reset) the camera or exposure meters turn off (exposure compensation settings

selected using the Ebutton are not reset).

As above, except that the exposure compensation value selected using

Onthe command dial is not reset when the camera or exposure meters turn off.

Off

Exposure compensation is set by pressing the Ebutton and rotating the main command dial.

AChange Main/Sub

The dial used to set exposure compensation when On (Auto reset) or On is selected for Custom Setting b3 (Easy exposure compensation) depends on the option selected for Custom Setting f6 (Customize command dials) > Change main/sub (0 233).

Mode

P

S

A

M

Customize command dials > Change main/sub

Off		On
Sub-command dial		Sub-command dial
Sub-command dial		Main command dial
Main command dial		Sub-command dial
	N/A

AShow ISO/Easy ISO

Custom Setting b3 (Easy exposure compensation) can not be used with Custom Setting d3 (Show ISO/Easy ISO). Adjustments to either of these items reset the remaining item; a message is displayed when the item is reset.

U

212