INSTALLATION AND CONNECTIONS
Connecting Your DVD Player
AUDIO IN | COMPUTER |
AC IN |
|
| IN |
Optional
Component video RCA3 cable (not supplied)
Audio Equipment
DVD player
L R | Y Cb Cr |
AUDIO IN
L | R | Component |
Audio cable (not supplied)
You can connect your projector to a DVD player with component output or Video output. To do so, simply:
1.Turn off the power to your projector and DVD player.
2.If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCA3) and the optional 15-
For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.
3.Turn on the projector and DVD player.
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.