IMPORTANT INFORMATION
Fire and Shock Precautions
1.Ensure that there is sufficient ventilation and that vents are unob- structed to prevent the
2.Prevent foreign objects such as paper clips and bits of paper from falling into your projector.
Do not attempt to retrieve any objects that might fall into your projec- tor. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified NEC ser- vice personnel.
3.Do not place any liquids on top of your projector.
4.Do not look into the lens while the projector is on. Serious damage to your eyes could result.
5.Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the lens is extensive, there- fore any kind of abnormal objects that can redirect light coming out of the lens, can cause unpredictable outcome such as fire or injury to the eyes.
6.Do not cover the lens with anything other than the
7.The projector is designed to operate on a power supply of
8.Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire.
9.If the projector is not to be used for an extended period of time, dis- connect the plug from the power outlet.
10.Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.
11.Do not handle the power plug with wet hands.
CAUTION
1.Do not try to touch the ventilation outlet on the rear as it can become heated while the projector is turned on.
2.Do no use the
3.When carrying the projector, heed the following:
*Use the supplied soft carrying case. Before putting the projector in the soft carrying case, be sure to close the lens shutter so as not to mar the lens.
*Do not handle the projector roughly.
*Do not send the soft carrying case by parcel delivery service or cargo shipment. The projector inside the soft carrying case could be damaged. (However, it is possible to use it as a carrier case on board.)
4.Select “High” in the Fan mode if you continue to use the projector for consecutive days. (From the menu, select [To Advanced Menu] → [Setup 2] → [Fan Mode].)
5.Do not unplug the power cable from the wall outlet under any one of the following circumstances.
Doing so can cause damage to the projector:
*While the Hour Glass icon appears.
*While the cooling fans are running. (The cooling fans continue to work for 60 seconds after the projector is turned off).
Lamp Replacement
•To replace the lamp, follow all instructions provided on page
•Be sure to replace the lamp when the message "The lamp has reached the end of its usable life. Please replace the lamp." ap- pears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.
If this happens, contact your NEC dealer for lamp replacement.
•Allow a minimum of 60 seconds to elapse after turning off the projec- tor. Then disconnect the power cable and allow 60 minutes to cool the projector before replacing the lamp.
What's in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your LT170 Projector.
OFF
P0WER
ON
|
| Remote control |
| COMPUTER | (7N900431) |
| VIDEO | |
| IN |
|
| EO IN |
|
|
| |
| IN |
|
AUDIO | Projector |
|
|
| |
|
| Batteries |
Power cable
(US: 7N080206)
Soft carrying case and its accessory pouch (EU: 7N080005) (24BS7281)
12
RGB signal cable (7N520012)
Band (24B17871)
Use for bundling cables.
Tripod adapter |
| ||
(24C05941) | (24H49051) |
| User’s manual |
|
| Quick |
|
For North America only |
|
| |
Registration card | Connect |
| |
Guide |
| Important | |
|
|
| |
Limited warranty |
|
| Information |
|
|
| |
For Europe only |
|
|
|
Guarantee policy |
|
|
|
|
|
|
|