PROJECTING AN IMAGE (BASIC OPERATION)
Turning off the Projector
To turn off the projector:
First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The “Power Off / Are you sure?” message will appear.
SE | LE |
CT |
MENU
After Use
Preparation: Make sure that the projector is not turned on.
1.Unplug the power cable.
2.Disconnect any other cables.
3.Retract adjustable tilt feet if extended.
LAMP
SOURCE
ENTER
STATUS
POWER
ON/STAND BY
OFF P0WER ON
COMPUTER
VIDEO
AUTO ADJ.
AUTOASPECT
ENTER
MENUCANCEL
Secondly, press the ENTER button or press the POWER (ON/STAND BY) or the POWER OFF button again.
The power indicator will glow orange. After the projector turns off, the cooling fans keep operating for 60 seconds
Lastly unplug the power cable. The power indicator will go out.
CAUTION
Do not unplug the power cable from the wall outlet under any one of the following circumstances. Doing so can cause damage to the projector:
•While the Hour Glass icon appears.
•While the cooling fans are running. (The cooling fans continue to
work for 60 seconds after the projector is turned off).
| 2 |
|
|
|
|
|
1 |
|
|
|
|
|
|
3 |
|
|
|
| COMP | UTE |
|
|
|
|
| ||
|
|
| VIDE | O IN |
| |
|
|
|
|
| ||
|
| EO IN |
|
| ||
AUD | IO IN |
|
|
| ||
CLO |
|
|
|
|
|
Lift the front part of the projector.
Push and hold the PUSH symbol of the Adjustable Tilt Foot button to extend the adjustable tilt feet up to a maximum height.
Lower the front of the projector while pressing and holding the Adjustable Tilt Foot button until retracting the Adjustable Tilt Foot down to a minimum height.
4.Use the Lens Shutter lever to close the lens shutter.
VI
IN
IN
AUDIO
5. Put the projector and its accessories in the soft carrying case. See “Using the Soft Carrying Case” on the following page.
