INSTALLATION AND CONNECTIONS

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.

First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet.

E

R

 

 

 

 

 

 

OURCETNES

YB

DN AT

 

 

TCE

 

 

 

 

/SNO

LES

 

 

 

 

RE

 

 

 

 

S

 

WOP

 

UNEM

 

UTATS

 

 

 

 

 

 

PMAL

 

 

MOOZ

SUCOF

HSUP

PUTER

COM

O IN

VIDE

O IN

S-VIDE

IN

AUDIO

MENU

LAMP

STATUS

POWER

ON/STAND BY

The projector will go into its standby mode and the power indicator will glow orange.

SE

L

ECT

MENU

LAMP

SOURCE

ENTER

STATUS

POWER

ON/STAND BY

CAUTION:

Do not unplug the power cable from the wall outlet under any one of the following circumstances.

Doing so can cause damage to the projector:

*While the Hour Glass icon appears.

*While the cooling fans are running. (The cooling fans continue to work for 60 seconds after the projector is turned off).

E-17