PROJECTING AN IMAGE (BASIC OPERATION)
Optimizing RGB Picture Automatically
Adjusting the Image Using Auto Adjust
Optimizing RGB image automatically.
Using the cabinet buttons
1.Press the MENU button .
The Basic menu will be displayed. Make sure that “Auto Adjust Ex- ecuted” is selected.
SE | LE |
CT |
MENU
Using the remote control
Press the AUTO ADJ. button
|
|
| The Hour Glass icon will appear. It takes some |
OFF | P0WER | ON | seconds to optimize an RGB image. |
|
COMPUTER
VIDEO
AUTO ADJ.
AUTOASPECT
ENTER
MENUCANCEL
LAMP
SOURCE
ENTER
This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also adjusts the clock phase to re-
STATUS
POWER
ON/STAND BY
duce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.)
This adjustment may be necessary when you connect your computer for the first time.
NOTE:
•Some signals may not be displayed correctly or take time.
•The Auto Adjust function does not work for component and video signal.
•If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock and Phase manually. See page
Turning Up or Down Volume
Sound level from the speaker on the projector can be adjusted when the menu is not displayed.
2.Press the ENTER button to optimize an RGB image automatically. The Hour Glass icon will appear. It takes some seconds to optimize an RGB image.
SEL | E |
CT |
MENU
| E |
| SEL CT |
MENU |
|
decrease volume | SOURCE |
ENTER | |
STATUS |
|
POWER |
|
ON/STAND BY |
|
increase volume
LAMP
SOURCE
ENTER
STATUS
POWER
ON/STAND BY
OFF P0WER ON
COMPUTER
VIDEO
AUTO ADJ.
AUTOASPECT
decrease volume 
ENTER
MENUCANCEL
increase volume
