Troubleshooting
B - Troubleshooting
B.1 Power-Up Troubleshooting
There are several possible error situations if the LEDs do not ßash.
Table B-1: Error Messages
Message | Diagnosis/Remedy |
|
|
|
|
Note which LED is blinking and its color, then contact | |
failure) | your dealer or Lantronix Technical Support. |
The Server boots but does not try to | Press the Test button. A brief description of the problem |
load the Flash ROM code | will be queued to the parallel port and printed. |
Network Error: The ACT LED will blink | A. Make sure the Ethernet network cable is properly |
yellow | connected and reboot the server. |
| B. If option A fails to resolve the problem, reload Flash |
| ROM. See Appendix D. |
|
|
B - 1
