Lantronix MPS1-T, MPS1-2 LAT Host Troubleshooting, 1Troubleshooting LAT ConÞgurations Using a Port

LAT Configuration

6.1.1 LAT Host Troubleshooting

By default, the LAT error message codes on the host are not translated into text error messages. If a LAT job fails and appears in the queue with an eight-digit hex result code, the code can be translated by issuing the following commands:

$ SHOW QUEUE/FULL/ALL queue_name (note the error code nnnnnnnn)

$ SET MESSAGE SYS$MESSAGE:NETWRKMSG.EXE $ EXIT %Xnnnnnnnn

Table 6-1:Troubleshooting LAT ConÞgurations Using a Port

Area to check Explanation

The speciÞed node name matches the ServerÕs node name

The speciÞed port name matches the portÕs name

Use the Show Server command.

Use the List Port 1 command.

6 - 3