Lantronix MPS1-2, MPS1-T, MPS100 manual Frequently-used Commands

Frequently-used Commands

F - Frequently-used Commands

This appendix lists some of the most frequently-used commands of the Print Server command set. More information about the command set, including additional options, can be found in the Print Server Reference Manual on the CD-ROM.

Please note the following before continuing:

¥Commands are divided into Server (general), Port, and Protocol sections. Within each section, commands are listed alphabetically.

¥Commands may require privileged user status. Enter Set Privileged, then enter the privileged password when prompted.

¥When you enter a DeÞne or Purge command, you must reboot the Server for the command to take effect.

¥When the abbreviated syntax Ò{ENDIS}Ó is shown, you must choose either Enabled or Disabled to complete the command.

F - 1