Frequently-used Commands

 

 

 

Table F-2:Port Commands, cont.

 

 

 

 

 

Command

 

 

Option(s)

Description

 

 

 

 

 

 

 

 

 

 

DEFINE PORT

1

FLOW

CTS

SpeciÞes CTS/RTS (hardware) ßow control.

option

 

 

 

 

 

 

{ENDIS}

Activates or deactivates the currently-conÞgured

 

 

 

 

 

 

 

ßow-control method.

 

 

 

 

 

 

 

 

NONE

Removes the current ßow control settings.

 

 

 

 

 

 

 

 

XON

SpeciÞes XON/XOFF (software) ßow control.

 

 

 

 

 

DEFINE PORT

1

NAME newname

Enter a name of up to 16 alphanumeric characters for

 

 

 

 

the speciÞed port.

 

 

 

 

 

DEFINE PORT

1

 

parity

Enter even, odd, mark, or space. Specifying mark or

PARITY option

 

 

space will change the character size to 7 bits.

 

 

 

 

 

 

 

 

NONE

SpeciÞes that no parity will be used (the default).

 

 

 

 

 

DEFINE PORT

1

SPEED baudnum

Sets the portÕs baud rate. Acceptable baudnum

 

 

 

 

values range from 300 to 115200 baud (or 230000

 

 

 

 

baud for 1ooBASE-T Servers).

 

 

{SHOWMONITOR} PORT 1

Displays the portÕs conÞguration characteristics once

 

 

 

 

(Show) or continually every three seconds (Monitor).

 

 

 

 

Counters and Status keywords can be added.

 

 

 

 

TEST PORT 1

option

COUNT rows

Sends an ASCII data stream to the port for the

 

 

 

WIDTH cols

speciÞed number of rows and/or columns.

 

 

 

 

 

 

 

 

POSTSCRIPT

Sends a PostScript test page to the port.

 

 

 

 

 

F - 9

Page 91
Image 91
Nikon MPS1-2, MPS1-T, MPS100 manual Table F-2Port Commands, Xon