Important!
• When the lens is mounted to a camera other than the D3, shift, |
|
tilt and/or revolve the lens with care. Failure to do so, may result |
|
in the lens scratching the camera body. | En |
• This lens is a manual focus lens, and autofocus is not possible | |
even when the camera's focus mode is set to AF mode. |
|
•Use of tilt/shift function can cause some vignetting or slight color change. (Vignetting is the darkening of the corners around the image.)
•When mounted on Nikon digital SLR (Nikon DX format) cameras, such as the
•Be careful not to soil or damage the CPU contacts.
•If the lens mount rubber gasket is damaged, be sure to visit your nearest Nikon authorized dealer or service center for repair.
•In low temperatures, new or fully charged batteries should be used in the camera.
4. Mounting lens
aSet the shift amount and tilt amount to 0 by rotating the shift and tilt knobs (Fig. 2).
Note: Avoid attaching/detaching the lens to/from the camera while using tilt, shift and/or revolving, and without locking each knob. Failure to do so can lead to you pinching your fingers between the lens and the camera body, or the lens scratching the camera body.
Fig. 2
bSet the tilt and shift knobs. (Fig. 3)
Note: Turning either knob too tightly may damage the knob.
Fig. 3
23
