Quick guide
One antenna/one LNB configuration
Select this alternative if you have one (1) LNB mounted on the antenna.
• Press opt to view the predefined channel.
LNB type
Select the correct LNB type for your configuration. The most common values, including Universal LNB, can be selected us- ing the cursor left/cursor right button.
LNB offset voltage
If the cable from the antenna is very long, the voltage at the LNB could be too low to change the polarisation. You can increase the voltage to the LNB by 0.5 V.
Satellite
Select one of the
Predefined channel
Select one of the predefined channels and adjust the antenna until a TV picture from the predefined channel is visible in the background.
•Press select to confirm all settings and then carry out the channel search procedure.
Channel search
•Select the “Automatic Search” alternative.
•Press select to start the search process.
Channel search in progress
This menu will be shown while the Mediamaster is searching for TV and radio channels.
All channels that are found will be listed on the screen.
Please note that the search procedure may take a few minutes. You can cancel the search at any time by pressing select.
When the search procedure has ended, a message will tell you how many TV and radio channels have been found.
• Press select to continue.
Time adjustment
The time is adjusted using the cursor up/cursor down buttons,
±half an hour at a time. You can also change the minutes using the cursor left/cursor right. buttons.
•Press select to finish the
GB 6
