M e s s a g i n g

Automate voice mail

Voice mail services vary by service provider. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service.

Write down number and process

1.Write down your voice mailbox number.

2.Call and check your voice mail as you normally would.

3.Write down your interaction with the recorded prompts step-by-step. Note that each voice mail service may vary. Your steps may resemble the following:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press *.

Be precise; you will need this information in "Set up voice mail with dialing codes," p. 38.

Set up voice mail with dialing codes

1.Select Menu > Contacts > 1-touch dialing.

2.Scroll to an empty 1-touch dialing slot, and select Assign.

3.Enter your voice mailbox number, including the area code.

4.Refer to dialing codes, and enter any codes as necessary. Use the information that you saved from "Write down number and process," p. 38.

For example, if you pause for 5 seconds after connecting to voice mail, enter ’p’ twice after the voice mailbox number, for example, 2145551212pp. For more information on dialing codes see "Insert dialing codes," p. 45.

5.Enter any remaining pauses or other information that allows you to listen to your messages, and select OK.

6.Enter a name (such as voice mail), and select OK.

To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key in the standby mode.

Minibrowser messages

Minibrowser messaging is a network service. See "Network services," p. 6, for more information.

38

Page 38
Image 38
Nokia 2865 Minibrowser messages, Automate voice mail, Write down number and process, Set up voice mail with dialing codes