NordicTrack CTL49021 user manual OW to Onnect, Tric shock, Is equipped with, Bracket

H OW TO C ONNECT THE T READMILL

HOW TO CONNECT THE POWER CORD
This product must be grounded.	If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock.
DANGER:	Improper connection

of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use an adapter to connect the plug to an improper receptacle.

Plug the grounding plug into a standard NEMA 5-20 receptacle as shown in drawing 2. Do not modify the plug or the receptacle. Do not use an adapter, a surge protector, or an extension cord.

2NEMA 5-20 Receptacle

This product is	1
for use on a dedi-
cated, 20-amp,
120-volt circuit.
No other appli-
ance should be
on the same cir-
cuit. This product	Cord	Bracket
is equipped with		Screws
	Bracket
a cord having an
equipment-
grounding

conductor and a grounding plug. Plug one end of the cord into the treadmill as shown in drawing 1. Attach the cord bracket over the cord with two bracket screws.

10