4.Refer to step 1. While a second person holds the
Uprights (95, 97), remove the two Upright Bolts (96).
Slide the Uprights (95, 97) fully onto the brackets on the
Frame (not shown). |
| Be careful to avoid pinching your |
hands or the wires. |
| Attach each Upright with four |
Upright Bolts (96) | as shown. | Firmly tighten all eight |
Upright Bolts. |
|
|
Firmly tighten the eight Handrail Bolts (99).
5.After the treadmill is placed in the location where it will be used (see HOW TO MOVE THE TREADMILL on page 9), make sure that both Rear Feet (5) and both front Wheels (not shown) rest firmly on the floor. If the treadmill rocks even slightly, turn the right Rear Foot clockwise or counterclockwise until the rocking motion is eliminated.
4 |
|
99 |
|
99 |
|
| 99 |
97 | 95 |
| |
| 96 |
| 96 |
5 |
|
| 5 |
6. Make sure that all parts are properly tightened before you use the treadmill. | Keep the included allen |
wrenches for adjustment purposes. To protect the floor or carpet from damage, place a mat under the tread- |
|
mill. |
|
8
