Nortec NH Series installation manual 10-10, Dispersion Method

Table 4. Recommended Condensate Line at Distributor(s)

Dispersion Method	Condensate Hose	Copper Tube (Potable)		Stainless Steel Tube
				(RO or DI)
1 x Steam Distributor	0.375 inch	0.250 inch. MED-L Tubing		0.375 Tube 0.049 inch thick
	NORTEC 132-8840		(0.375 inch OD)
3 x Steam Distributor	0.375 inch	0.500 inch. MED-L Tubing		0.650 Tube 0.049 inch thick
	NORTEC 132-8840		(0.875 inch OD)
Note: *When using more	then 1 steam distributor,	the condensate line must be trapped before it is
joined together. See figure 4
Table 5. Equivalent Lengths of Elbows and Tee Fittings
Nominal Tube	Standard 90degree		Standard 45 degree
Diameter	Elbow		Elbow	Side Outlet Tee
0.750 / 0.875 in.	2 ft.		1 ft.	4 ft.
1.500 / 1.750 in.	3 ft. 6 in.		1ft. 9 in.	7 ft.
2.000 / 2.500 in.	4 ft. 6 in.		2 ft. 3 in.	10 ft.
	Table 6. Humidifier and Distributor Inlet/Outlet Sizes
Humidifier	Steam Outlet		Distributor	Steam Inlet
NH 5-30	0.875 in. OD		ASD, BSD	0.875 inch OD
NH 50-100	1.75 in. OD		CSD	1.75 inch OD
			Blower Pack	0.875 inch OD or
NH 150-200	Two 1.75 in. OD			1.75 inch OD
			SAM-e	1.75 inch OD*
			mini SAM-e	0.875 or 1.75 inch OD**

NOTE: * SAM-e may have multiple 1.75 in. inlets depending on order.

** mini SAM-e inlet is determined on order and may have two 1.75 in. OD inlets.

10-10

Page 17 2008-08-28