Nortec NH Series Check Lists, A.Pre-Norteconline Start Up Checklist Wiring, Network Connection

2.CHECK LISTS

A.PRE-NORTEC ONLINE START UP CHECKLIST WIRING

(1)Humidifier-to-Humidifier Connection:

Each individual Humidifier linked to lead Unit.

Connection can be direct or daisy-chained to other units.

(2) Network Connection:

Lead Unit wired to Local Network (Ethernet, GPRS, Dial-up).

Network activity verified.

(3) Controls Wired:

Directly to humidifiers.

(4) Start-Up Procedure:

Ensure power is being supplied to the humidifier and Nortec Online Module.

Verify power to NetBiter (Power LED should be lit).

After power-up, verify network communication.

Verify variable operation after mapping is complete.

Perform regular humidifier start-up check.

B. PRE-NORTEC LINKS START-UP CHECKLIST
(1)	Humidifier-to-Humidifier	(4)	Start-Up Procedure:
	Connection:		Verify power to NORTEC Links
	Each individual Humidifier linked		module.
	to lead Unit.		Verify power to I/O-Controller.
	Connection can be direct or
			Adjust Network address dials to
	daisy-chained to other units.
			desired address (BACnet/IP
(2)	Network Connection:		address is preset at factory).
	Lead Unit wired to Local BMS.		After power-up, verify network
	Network activity verified.		communication.
			Map desired network variables to
(3)	Controls Wired:
			BMS.
	Directly to humidifiers.
			Verify variable operation after
			mapping is complete.

Perform regular humidifier start- up check.

10-50

Page 71 2008-08-28