USB support | Nortel Networks 1165E specification

About the Nortel IP Phone 1165E

Figure 3 on page 17 shows an idle LCD screen.

Figure 3: IP Phone 1165E LCD display screen

USB support

The IP Phone 1165E has a USB port for connecting a USB keyboard, USB mouse, USB headset, and USB flash drive. The IP Phone 1165E supports powered downstream 1.1-compliant USB hubs, including USB

2.0hubs, if they offer USB 1.1-backwards compliancy. There are two levels of power for the USB port.

•When you power the IP Phone 1165E through Ethernet POE, the IP Phone 1165E provides up to 100 mA at 5 volts for the USB port.

•When you power the IP Phone 1165E through local AC power, the IP Phone 1165E provides up to 500 mA at 5 volts on the USB port.

Note: Current limiting can obstruct the working of complex devices such as USB keyboards with built-in hubs. If a hub is involved, use external power.

You can plug a USB flash drive into the USB Port of the IP Phone 1165E or on a powered hub connected to the IP Phone, and transfer files to and from the IP Phone.

17

Image 17

Nortel Networks 1165E manual USB support, On page 17 shows an idle LCD screen

Contents

IP Phone 1165E Page October April Revision history Contents Contents About the Nortel IP Phone 1165E Basic features About the Nortel IP Phone 1165E About the Nortel IP Phone 1165E On page 10 shows the IP Phone 1165E Telephone controls About the Nortel IP Phone 1165E About the Nortel IP Phone 1165E About the Nortel IP Phone 1165E About the Nortel IP Phone 1165E Telephone display About the Nortel IP Phone 1165E On page 17 shows an idle LCD screen USB support Security features Call features and Flexible Feature Codes To change your Scpw Highlight New Password Mode To turn Password Protection on or off Logging in without Agent ID for basic ACD Agent and supervisor features To log in as an agent Logging in with an Agent ID and MQA login options Logging in using Multiple Queue Assignments for Basic ACD To log To use Default Login Using Default Login To log out Logging out To answer the call Answering ACD calls To terminate the call Using Call Forcing Using Activity code Using Return to Queue on No AnswerTo enable Call Forcing for headset users To record activities To use Emergency Using Emergency Placing or answering non-ACD calls Using Not ReadyTo use Not Ready To place a call To answer a call Contacting your supervisorTo answer a call from your supervisor To answer a call from your supervisor while on another call To conference in your supervisor during a call in progress To place a call to your supervisorTo return to the ACD call Agent features To use Answer Agent Using Answer Agent Using Answer Emergency Using the Agent key To use Call Agent Using Call AgentTo use Answer Emergency Using Night Service Using InterflowTo activate Night Service To use Interflow To deactivate Night Service To transition to Night Service To observe a call Observing a call To display information on your ACD queue Displaying the queue Indicator Queue status Description To display agent status Displaying agent status Current status of agents Terms you should know Terms you should know Information display Terms you should know Terms you should know Terms you should know Page Page Page Page Page Legal Notice