Chapter 1 Installing the Nortel VPN Router 2750 chassis 29
Installing the chassis
To install the VPN Router 2750, do one of the following:
•Position the chassis on a flat, sturdy, horizontal surface.
•Mount the chassis in a standard equipment rack (see “Installing the chassis in an equipment rack” on page 30).
Installing the chassis on a flat surface
If you decide to place the VPN Router 2750 on a flat surface, ensure that the surface is large enough for the gateway and sturdy enough to support the combined weight of the VPN Router 2750 and the cables that you attach to it.
The VPN Router 2750 accessory kit includes four rubber feet that you can attach to the bottom of the gateway. Figure 2 shows the placement of these rubber feet.
Figure 2 Placement of rubber feet on the bottom of the chassis
Attach feet (4)
CS160016A
