Nortel Networks 2750 manual 56/64K CSU/DSU WAN interface card LEDs

Models: 2750

1 108
Download 108 pages 23.09 Kb
Page 46
Image 46

46Chapter 2 Cabling the VPN Router and turning the power on

56/64K CSU/DSU WAN interface card LEDs

Figure 14 shows the LEDs on the 56/64K CSU/DSU WAN interface card.

Figure 14 LEDs on the 56/64K CSU/DSU WAN interface card

Blue LED

Red LED

56/64K

DDS

Green LED

Yellow LED

Table 10 describes the LEDs on the 56/64K CSU/DSU WAN interface card.

Table 10 LED indicators on the 56/64K CSU/DSU WAN interface card

LED

Description

 

 

Blue

The blue alarm LED is lit when the interface card detects a DDS

 

out-of-frame (OOF) condition on the receive signal.

Red

The red alarm LED is lit when the interface card detects a DDS loss-of-

 

signal (LOS) or loss-of-frame (LOF) condition on the receive signal.

Yellow

The yellow alarm LED is lit when the interface card detects a DDS

 

out-of-service condition on the receive signal. (This LED indicates that

 

the far-end equipment detects a local LOS or LOF condition.)

Green

The green LED is lit when the interface card receives valid DDS signal

 

and framing (this LED indicates normal operation of the card.)

All LEDs off

The port is disabled.

 

 

NN46110-318 02.01

Page 46
Image 46
Nortel Networks 2750 56/64K CSU/DSU WAN interface card LEDs, Describes the LEDs on the 56/64K CSU/DSU WAN interface card