32 Chapter 1 Installing the Nortel VPN Router 2750 chassis
Mounting the chassis in the equipment rack
Nortel recommends that two people install the chassis in the rack.
To install the VPN Router 2750 in the equipment rack:
1Set the VPN Router 2750 on the
2Remove the front bezel from the VPN Router 2750 (Figure 5).
a Use the Phillips screwdriver to turn each of the two screws on the front bezel a quarter turn counterclockwise.
Figure 5 Removing the front bezel
CS260015E
bGrip the two handles, and firmly pull the bezel toward you to unsnap it from the chassis.
Caution: Risk of equipment damage
Do not use the piece with the Nortel logo and the LEDs as a handle.
The first several times that you remove the front bezel, the bezel can stick because the ball studs and socket clips are new.
