53
Chapter 3
Configuring the management IP interface
This chapter describes how to configure a management Internet Protocol (IP) address, subnet mask, and default gateway address on a newly installed VPN Router 2750. After you complete the procedures in this chapter, you can configure and manage the VPN Router 2750 using a Web browser from a PC.
To configure the management IP interface, you use the serial interface configuration menu. You must connect a PC or terminal to the serial port on the VPN Router 2750.
This chapter contains the following topics:
Topic | Page |
|
|
Required information | 54 |
|
|
Configuring the management IP address | 55 |
|
|
Testing the configuration | 59 |
|
|
Troubleshooting | 60 |
|
|
