Chapter 4 Installing option cards and DIMMs 75
10Replace the top cover on the chassis (Figure 21 on page 65). a Hold the cover at an angle, and slide it onto the chassis.
b Insert the four screws that secure the cover to the chassis, and use the screwdriver to tighten the screws.
11To install the VPN Router 2750 in an equipment rack, do the following: a Set the VPN Router 2750 on the
b Insert one of the panhead screws through the bottom hole on each side of the shelf into the hole in the rack, and tighten the screws (Figure 4 on page 31).
12Replace the front bezel (Figure 25 on page 72).
a Hold the bezel by the two handles, and push the bezel onto the chassis.
b Use the screwdriver to tighten the two screws that secure the bezel to the chassis.
