Part No. 893-01019-A June
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
Statement of Conditions
Trademarks
Federal Communications Commission FCC Statement
EN 55 022 Declaration of Conformance
Declaration of Conformity
Voluntary Control Council for Interference VCCI Statement
Bay Networks, Inc. Software License Agreement
893-01019-A
c that the operation of the Software will be uninterrupted or error free, or d that all defects in the operation of the Software will be corrected. Bay Networks is not obligated to remedy any Software defect that cannot be reproduced with the latest Software release. These warranties do not apply to the Software if it has been i altered, except by Bay Networks or in accordance with its instructions ii used in conjunction with another vendor’s product, resulting in the defect or iii damaged by improper environment, abuse, misuse, accident, or negligence. THE FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Licensee is responsible for the security of its own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or altered files, data, or programs
8. Export and Re-export. Licensee agrees not to export, directly or indirectly, the Software or related technical data or information without first obtaining any required export licenses or other governmental approvals. Without limiting the foregoing, Licensee, on behalf of itself and its subsidiaries and affiliates, agrees that it will not, without first obtaining all export licenses and approvals required by the U.S. Government i export, re-export, transfer, or divert any such Software or technical data, or any direct product thereof, to any country to which such exports or re-exports are restricted or embargoed under United States export control laws and regulations, or to any national or resident of such restricted or embargoed countries or ii provide the Software or related technical data or information to any military end user or for any military end use, including the design, development, or production of any chemical, nuclear, or biological weapons
893-01019-A
Preface
Contents
Chapter
Overview of the TokenSpeed Module
Troubleshooting the TokenSpeed Module
Chapter Installing and Connecting the TokenSpeed Module
Chapter
Appendix A
Figures
Station to hub connection RJ-45 to IBM Type
Tables
893-01019-A
Purpose
Preface
Audience
Conventions
Two-tiered Procedure Format
Special Message Formats
Ordering Bay Networks Publications
Related Publications
Using SpeedView 2.1 for Windows
Model 5000BH Switches
Bay Networks Customer Support
How to Get Help
Preface
For More Information
xvii
xviii
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
893-01019-A
About the TokenSpeed Module
Chapter Overview of the TokenSpeed Module
TokenSpeed Module Ports and Connectivity
Features
Filtering
Fault Tolerance
Caching and Proxy
Network Management
Figure 1-1. Hardware features of the TokenSpeed module
Physical Description
Giving a Server a Dedicated Port
Chapter TokenSpeed Module Applications
Figure 2-1. Giving a server a dedicated port
Segmenting a Ring
TokenSpeed Module Applications
Connecting a Segment Through the RI or RO Port
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
Connecting a Segment Using a Lobe Port
Figure 2-3. Connecting ring segments through lobe ports
Before
Concentrating Rings into a Router
Replacing a Source Route Bridge or Router
Figure 2-4. Replacing a source route bridge or router
7571EA
Figure 2-5. Concentrating multiple rings into a router
Preparing for Installation
Chapter 3 Installing and Connecting the TokenSpeed Module
1. Remove the filler panel
Installing the TokenSpeed Module
Figure 3-1. Removing a filler panel
Figure 3-2. Inserter/extractor levers ready for installation
Figure 3-4. Inserting the module into the chassis
Figure 3-3. Slot module guides
Connecting Cables to TokenSpeed Ports
Table 3-1. Port types for the TokenSpeed module
Token Ring Connections
Management Connection
Verifying the Installation
TokenSpeed Module LEDs
LED Switch Startup Sequence
TokenSpeed
Factory default configuration settings
Configuring the TokenSpeed Module
Factory default configuration settings continued
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
3-10
893-01019-A
Windows
Removing and Replacing a Module
Replacing a TokenSpeed/MCP Module
6. Slide the module out of the chassis see Figure
Replacing a TokenSpeed Module
5. Slide the module out of the chassis see Figure
Page
Chapter 4 Troubleshooting the TokenSpeed Module
Switch Startup Failure with TokenSpeed/MCP
11. Click on the icon for the switch and choose Download software
TokenSpeed Module Startup Failure
9. Click on the Start button in the Software Download dialog box
2. Remove and reinsert the failing module
3. Using SpeedView, verify the following items
Port Insertion Problems
2. Verify that the cabling is correct
4. Disable the port then enable it again
Page
Appendix A Technical Specifications
Safety Agency Approvals
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
Connectors
Environmental Specifications
Appendix B Cables
Cable Types
Port Types
Figure B-1. RJ-45 connector on the TokenSpeed module
Token Ring Connectors on the TokenSpeed Module
Table B-2
Cable distances
Figure B-2. Connectors for token ring network cables
Cable and Connector Pin Assignments
RJ-45 to RJ-45 Connection
Figure B-4. Station to hub connection RJ-45 to RJ-45
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
Figure B-5. Bay/SNPX RO to RI connection RJ-45 to RJ-45
7603EB
Figure B-6. RI-other to RO connection RJ-45 to RJ-45
Cables
Figure B-7. RO-other to RI connection RJ-45 to RJ-45
7684EB
RJ-45 to DB-9 Connection
Figure B-9. Station to hub connection RJ-45 to DB-9
Cables
Figure B-10. Bay/SNPX RO to RI connection RJ-45 to DB-9
7607EB
Figure B-11. RI-other to RO connection RJ-45 to DB-9
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
Figure B-12. RO-other to RI connection RJ-45 to DB-9
B-10
RJ-45 to IBM Type 1 Connection
Figure B-14. Bay/SNPX RO to RI connection RJ-45 to IBM Type
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
Figure B-15. RI-other to RO connection RJ-45 to IBM Type
B-12
Serial MCP Connections
Table B-4
Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
Female DB-25 to female DB-9 adapter
B-14
types, B-2 caching, RIF
Index
RJ-45, 1-1, 3-6, B-3
Index-1
Index-2
LEDs
Index-3
TFTP