Manuals / Nortel Networks / Computer Equipment / Switch

Nortel Networks 5000BH Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules, Connectors

Models: 5000BH

1 70

Download 70 pages 41.38 Kb

Page 52

Environmental Speciﬁcations

Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules

Environmental Speciﬁcations
Operating temperature	0° to 40° C
Storage temperature	–25°to 70° C
Operating humidity	85% maximum relative humidity, noncondensing
Storage humidity	95% maximum relative humidity, noncondensing
Operating altitude	10,000 ft (3,000 m) maximum
Storage altitude	10,000 ft (3,000 m) maximum
Free fall/drop	ISO 4180-s, NSTA 1A
Vibration	IEC 68-2-6/34
Shock/bump	IEC 68-2-27-29
Electromagnetic Emissions

Meets requirements of:

FCC Part 15, Subpart B, Class A

EN 55 022 (CISPR 22:1985), Class A

VCCI Class 1 ITE

Electromagnetic Susceptibility
Electrostatic discharge (ESD)	EC 801-2, Level 2
Radiated electromagnetic ﬁeld	EC 801-2, Level 2
Electrical fast transient/burst	EC 801-4, Level 2
Electrical surge	IEC 801-5, Level 1/2
Safety Agency Approvals

UL/CUL listed (UL 1950)

CSA certiﬁed (CSA 22.2 #950)

TUV licensed (EN 60 950)

UL-94-V1 ﬂammability requirements for all PC boards

Connectors

RJ-45 connectors for UTP/STP interface

Mini DIN 8 serial connector for network administration (TokenSpeed/MCP only)

A-2	893-01019-A

Image 52

Nortel Networks 5000BH manual Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules, Environmental Speciﬁcations

Contents

Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules Part No. 893-01019-A JuneTrademarks Statement of ConditionsFederal Communications Commission FCC Statement EN 55 022 Declaration of ConformanceVoluntary Control Council for Interference VCCI Statement Declaration of ConformityBay Networks, Inc. Software License Agreement 893-01019-Ac that the operation of the Software will be uninterrupted or error free, or d that all defects in the operation of the Software will be corrected. Bay Networks is not obligated to remedy any Software defect that cannot be reproduced with the latest Software release. These warranties do not apply to the Software if it has been i altered, except by Bay Networks or in accordance with its instructions ii used in conjunction with another vendor’s product, resulting in the defect or iii damaged by improper environment, abuse, misuse, accident, or negligence. THE FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Licensee is responsible for the security of its own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or altered ﬁles, data, or programs 8. Export and Re-export. Licensee agrees not to export, directly or indirectly, the Software or related technical data or information without ﬁrst obtaining any required export licenses or other governmental approvals. Without limiting the foregoing, Licensee, on behalf of itself and its subsidiaries and afﬁliates, agrees that it will not, without ﬁrst obtaining all export licenses and approvals required by the U.S. Government i export, re-export, transfer, or divert any such Software or technical data, or any direct product thereof, to any country to which such exports or re-exports are restricted or embargoed under United States export control laws and regulations, or to any national or resident of such restricted or embargoed countries or ii provide the Software or related technical data or information to any military end user or for any military end use, including the design, development, or production of any chemical, nuclear, or biological weapons 893-01019-A Contents PrefaceChapter Overview of the TokenSpeed ModuleChapter Installing and Connecting the TokenSpeed Module Troubleshooting the TokenSpeed ModuleChapter Appendix AFigures Station to hub connection RJ-45 to IBM Type Tables 893-01019-A Purpose PrefaceAudience Conventions Two-tiered Procedure FormatSpecial Message Formats Related Publications Ordering Bay Networks PublicationsUsing SpeedView 2.1 for Windows Model 5000BH SwitchesHow to Get Help Bay Networks Customer SupportPreface For More Informationxvii xviii Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules893-01019-A Chapter Overview of the TokenSpeed Module About the TokenSpeed ModuleFeatures TokenSpeed Module Ports and ConnectivityFault Tolerance FilteringCaching and Proxy Network ManagementPhysical Description Figure 1-1. Hardware features of the TokenSpeed moduleChapter TokenSpeed Module Applications Giving a Server a Dedicated PortSegmenting a Ring Figure 2-1. Giving a server a dedicated portConnecting a Segment Through the RI or RO Port TokenSpeed Module ApplicationsConnecting a Segment Using a Lobe Port Using the 8-port TokenSpeed and TokenSpeed/MCP Switch ModulesFigure 2-3. Connecting ring segments through lobe ports BeforeConcentrating Rings into a Router Replacing a Source Route Bridge or RouterFigure 2-4. Replacing a source route bridge or router Figure 2-5. Concentrating multiple rings into a router 7571EAChapter 3 Installing and Connecting the TokenSpeed Module Preparing for InstallationInstalling the TokenSpeed Module 1. Remove the ﬁller panelFigure 3-2. Inserter/extractor levers ready for installation Figure 3-1. Removing a ﬁller panelFigure 3-3. Slot module guides Figure 3-4. Inserting the module into the chassisConnecting Cables to TokenSpeed Ports Token Ring Connections Table 3-1. Port types for the TokenSpeed moduleVerifying the Installation Management ConnectionTokenSpeed Module LEDs LED Switch Startup SequenceTokenSpeed Conﬁguring the TokenSpeed Module Factory default conﬁguration settingsUsing the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules Factory default conﬁguration settings continued3-10 893-01019-ARemoving and Replacing a Module WindowsReplacing a TokenSpeed/MCP Module 6. Slide the module out of the chassis see Figure Replacing a TokenSpeed Module 5. Slide the module out of the chassis see Figure Page Chapter 4 Troubleshooting the TokenSpeed Module Switch Startup Failure with TokenSpeed/MCP TokenSpeed Module Startup Failure 11. Click on the icon for the switch and choose Download software9. Click on the Start button in the Software Download dialog box 2. Remove and reinsert the failing module3. Using SpeedView, verify the following items Port Insertion Problems2. Verify that the cabling is correct 4. Disable the port then enable it again Page Appendix A Technical Speciﬁcations Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules Safety Agency ApprovalsConnectors Environmental SpeciﬁcationsAppendix B Cables Port Types Cable TypesToken Ring Connectors on the TokenSpeed Module Figure B-1. RJ-45 connector on the TokenSpeed moduleTable B-2 Cable distancesCable and Connector Pin Assignments Figure B-2. Connectors for token ring network cablesRJ-45 to RJ-45 Connection Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules Figure B-4. Station to hub connection RJ-45 to RJ-45Figure B-5. Bay/SNPX RO to RI connection RJ-45 to RJ-45 7603EBCables Figure B-6. RI-other to RO connection RJ-45 to RJ-45Figure B-7. RO-other to RI connection RJ-45 to RJ-45 7684EBRJ-45 to DB-9 Connection Cables Figure B-9. Station to hub connection RJ-45 to DB-9Figure B-10. Bay/SNPX RO to RI connection RJ-45 to DB-9 7607EBUsing the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules Figure B-11. RI-other to RO connection RJ-45 to DB-9Figure B-12. RO-other to RI connection RJ-45 to DB-9 B-10RJ-45 to IBM Type 1 Connection Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules Figure B-14. Bay/SNPX RO to RI connection RJ-45 to IBM TypeFigure B-15. RI-other to RO connection RJ-45 to IBM Type B-12Serial MCP Connections Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules Table B-4Female DB-25 to female DB-9 adapter B-14Index types, B-2 caching, RIFRJ-45, 1-1, 3-6, B-3 Index-1LEDs Index-2TFTP Index-3