Manuals / Nortel Networks / Computer Equipment / Switch

Nortel Networks 5000BH manual Slide the module out of the chassis see Figure

Models: 5000BH

1 70

Download 70 pages 41.38 Kb

Page 41

6.Slide the module out of the chassis (see Figure 3-10).

Installing and Connecting the TokenSpeed Module

6.Slide the module out of the chassis (see Figure 3-10).

6471

Figure 3-10. Removing the module from the switch chassis

7.If you will not be replacing the module soon, attach a ﬁller panel over the empty slot. Otherwise, continue with step 8.

8.Install the new module, following the instructions in “Installing the TokenSpeed Module” on page 3-2.

9.Turn on the power to the switch.

10.Download the saved conﬁguration ﬁle to the new module.

For module conﬁguration instructions and for instructions on saving and downloading ﬁles, refer to Using SpeedView 2.1 for Windows.

893-01019-A

3-13

Image 41

Nortel Networks 5000BH manual Slide the module out of the chassis see Figure

Contents

Part No. 893-01019-A June Using the 8-port TokenSpeed and TokenSpeed/MCP Switch ModulesStatement of Conditions TrademarksFederal Communications Commission FCC Statement EN 55 022 Declaration of ConformanceDeclaration of Conformity Voluntary Control Council for Interference VCCI StatementBay Networks, Inc. Software License Agreement 893-01019-Ac that the operation of the Software will be uninterrupted or error free, or d that all defects in the operation of the Software will be corrected. Bay Networks is not obligated to remedy any Software defect that cannot be reproduced with the latest Software release. These warranties do not apply to the Software if it has been i altered, except by Bay Networks or in accordance with its instructions ii used in conjunction with another vendor’s product, resulting in the defect or iii damaged by improper environment, abuse, misuse, accident, or negligence. THE FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Licensee is responsible for the security of its own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or altered ﬁles, data, or programs 8. Export and Re-export. Licensee agrees not to export, directly or indirectly, the Software or related technical data or information without ﬁrst obtaining any required export licenses or other governmental approvals. Without limiting the foregoing, Licensee, on behalf of itself and its subsidiaries and afﬁliates, agrees that it will not, without ﬁrst obtaining all export licenses and approvals required by the U.S. Government i export, re-export, transfer, or divert any such Software or technical data, or any direct product thereof, to any country to which such exports or re-exports are restricted or embargoed under United States export control laws and regulations, or to any national or resident of such restricted or embargoed countries or ii provide the Software or related technical data or information to any military end user or for any military end use, including the design, development, or production of any chemical, nuclear, or biological weapons 893-01019-A Preface ContentsChapter Overview of the TokenSpeed ModuleTroubleshooting the TokenSpeed Module Chapter Installing and Connecting the TokenSpeed ModuleChapter Appendix AFigures Station to hub connection RJ-45 to IBM Type Tables 893-01019-A Audience PrefacePurpose Special Message Formats Two-tiered Procedure FormatConventions Ordering Bay Networks Publications Related PublicationsUsing SpeedView 2.1 for Windows Model 5000BH SwitchesBay Networks Customer Support How to Get Helpxvii For More InformationPreface 893-01019-A Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modulesxviii About the TokenSpeed Module Chapter Overview of the TokenSpeed ModuleTokenSpeed Module Ports and Connectivity FeaturesFiltering Fault ToleranceCaching and Proxy Network ManagementFigure 1-1. Hardware features of the TokenSpeed module Physical DescriptionGiving a Server a Dedicated Port Chapter TokenSpeed Module ApplicationsFigure 2-1. Giving a server a dedicated port Segmenting a RingTokenSpeed Module Applications Connecting a Segment Through the RI or RO PortUsing the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules Connecting a Segment Using a Lobe PortFigure 2-3. Connecting ring segments through lobe ports BeforeFigure 2-4. Replacing a source route bridge or router Replacing a Source Route Bridge or RouterConcentrating Rings into a Router 7571EA Figure 2-5. Concentrating multiple rings into a routerPreparing for Installation Chapter 3 Installing and Connecting the TokenSpeed Module1. Remove the ﬁller panel Installing the TokenSpeed ModuleFigure 3-1. Removing a ﬁller panel Figure 3-2. Inserter/extractor levers ready for installationFigure 3-4. Inserting the module into the chassis Figure 3-3. Slot module guidesConnecting Cables to TokenSpeed Ports Table 3-1. Port types for the TokenSpeed module Token Ring ConnectionsManagement Connection Verifying the InstallationTokenSpeed LED Switch Startup SequenceTokenSpeed Module LEDs Factory default conﬁguration settings Conﬁguring the TokenSpeed ModuleFactory default conﬁguration settings continued Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules3-10 893-01019-AWindows Removing and Replacing a ModuleReplacing a TokenSpeed/MCP Module 6. Slide the module out of the chassis see Figure Replacing a TokenSpeed Module 5. Slide the module out of the chassis see Figure Page Chapter 4 Troubleshooting the TokenSpeed Module Switch Startup Failure with TokenSpeed/MCP 11. Click on the icon for the switch and choose Download software TokenSpeed Module Startup Failure9. Click on the Start button in the Software Download dialog box 2. Remove and reinsert the failing module2. Verify that the cabling is correct Port Insertion Problems3. Using SpeedView, verify the following items 4. Disable the port then enable it again Page Appendix A Technical Speciﬁcations Safety Agency Approvals Using the 8-port TokenSpeed and TokenSpeed/MCP Switch ModulesConnectors Environmental SpeciﬁcationsAppendix B Cables Cable Types Port TypesFigure B-1. RJ-45 connector on the TokenSpeed module Token Ring Connectors on the TokenSpeed ModuleTable B-2 Cable distancesFigure B-2. Connectors for token ring network cables Cable and Connector Pin AssignmentsRJ-45 to RJ-45 Connection Figure B-4. Station to hub connection RJ-45 to RJ-45 Using the 8-port TokenSpeed and TokenSpeed/MCP Switch ModulesFigure B-5. Bay/SNPX RO to RI connection RJ-45 to RJ-45 7603EBFigure B-6. RI-other to RO connection RJ-45 to RJ-45 CablesFigure B-7. RO-other to RI connection RJ-45 to RJ-45 7684EBRJ-45 to DB-9 Connection Figure B-9. Station to hub connection RJ-45 to DB-9 CablesFigure B-10. Bay/SNPX RO to RI connection RJ-45 to DB-9 7607EBFigure B-11. RI-other to RO connection RJ-45 to DB-9 Using the 8-port TokenSpeed and TokenSpeed/MCP Switch ModulesFigure B-12. RO-other to RI connection RJ-45 to DB-9 B-10RJ-45 to IBM Type 1 Connection Figure B-14. Bay/SNPX RO to RI connection RJ-45 to IBM Type Using the 8-port TokenSpeed and TokenSpeed/MCP Switch ModulesFigure B-15. RI-other to RO connection RJ-45 to IBM Type B-12Serial MCP Connections Table B-4 Using the 8-port TokenSpeed and TokenSpeed/MCP Switch ModulesFemale DB-25 to female DB-9 adapter B-14types, B-2 caching, RIF IndexRJ-45, 1-1, 3-6, B-3 Index-1Index-2 LEDsIndex-3 TFTP