UnlockingYourPhone

At the “Enter Unlock Code” prompt, enter your unlock code and press Ok (left softkey).

ChangingtheLockCode

1.Press / > Settings > Security > Change Passwords.

2.Select Unlock Code then enter your current unlock code and press Ok (left softkey).

3.Enter and reenter your new lock code, pressing Ok (left softkey) after each.

CallinginLockMode

You can place calls to 911 when in lock mode.

To call an emergency number, dial 911 and press `.

LockingYourKeypad

When your phone is closed and in standby mode, your keypad locks to prevent accidental key presses.

To lock your keypad now, press / > Settings > Security > Keypad Lock > Lock Now, or press

/*.

To change how long your phone waits before it automatically locks your keypad, press / > Settings > Security > Keypad Lock > Auto Lock and select a time interval of 30 seconds, 1minute, 5 minutes, 10 minutes, 15 minutes, 20 minutes, or Off.

Note: If the keypad setting is set to off, your keypad will remain unlocked.

UnlockingYourKeypad

To unlock your keypad, press /*.

Settings

6. Settings

91

Page 101
Image 101
Nortel Networks I680 UnlockingYourPhone, ChangingtheLockCode, CallinginLockMode, LockingYourKeypad, UnlockingYourKeypad