Nortel Networks I680 manual DirectTalk, Call Status and Completion

Call Status and Completion

After a failed incoming or outgoing Direct Connect call or Call Alert, you can send a message to the caller or intended recipient.

Tosetupamessageforincomingoroutgoing calls:

1.Press / > Settings > Advanced > Call Completion > Incoming Call or Outgoing Call.

2.In the Send Msg field, select Off, Ask First, or Automatic.

3.Select Message and create a message to be sent, or press QNotes (left softkey) and select a predefined message.

4.Press r and then press Back (right softkey).

Tosendamessage afterreceivingormakingacall:

1.After a failed incoming or outgoing Direct Connect call, within five seconds, Send Text Message To will appear.

2.Press Yes (left softkey) to send your predefined message or press No (right softkey) to cancel.

3.To edit a message before sending it, press

/ > Edit

DirectTalk

Nextel Direct Talk allows for two-way radio communication “off the network” between two or more phones equipped with this capability. This feature is useful in areas without network coverage.

You can make:

Code calls – two-way radio calls conducted off the network and using open channels and codes. In these calls, anyone using your same channel and code can hear your conversation.

Private calls – two-way radio calls conducted off the network and using the wireless phone numbers of the participants. In these calls, others using the same channel cannot listen in.

When using Direct Talk mode, the two phones should be a minimum of six feet apart to maximize performance and improve transmission range. You can only make Direct Talk calls to users located within your

Making Calls

3. Making and Answering Calls 43