Nortel Networks I680 manual Vibrate Settings, Todeletea ringtone, ToactivateVibrateAll

In most cases, when you delete a ring tone that you purchased from your phone, you will have to purchase it again.

Todeletea ringtone:

1.Press / > Multimedia > Ring Tones.

2.Make sure Vibrate All is set to Off.

3.Highlight a ringtone and press / > Delete.

4.Press Yes (left softkey) to confirm.

Vibrate Settings

VibrateAll

The Vibrate All option allows you to be notified of calls and messages with a vibration instead of an audible alert.

ToactivateVibrateAll:

Press and hold the volume button down in standby mode. (Pressing and holding displays “VibeAll: On.” Continuing to hold the button down displays “VibeAll: Locked.”)

– or –

Press / > Multimedia > Ring Tones > Vibrate All. Set this option to On or Locked.

Tip: Setting this option to Locked requires you to press and hold the volume control up to turn Vibrate All off. The Locked option helps prevent you from accidentally turning Vibrate All off.

TodeactivateVibrateAll:

1.Press and hold the volume key up to unlock vibrate all.

2.Press the volume key up repeatedly to select a volume level or press / > Multimedia > Ring Tones > Vibrate All > Off.

These icons indicate how the ringer is set:

/The phone always vibrates instead of making a sound.

.The phone vibrates instead of making a sound for phone calls.

"Direct Connect calls, Group Connect calls, and Talkgroup calls are heard through the earpiece, not the speaker.

Settings

6. Settings 71