Nortel Networks I680 manual ReplyingtoaMessage, MoreWaystoBeginaMessage, Toreplytoamessage

ReplyingtoaMessage

You can reply to a read message while you are viewing it or while it is highlighted in the Message Center. You cannot reply to unread messages.

When you reply to a message, some of the fields in your reply are filled in automatically. These may include To, Message (the first 40 characters of the received message), Subject, and Cc.

Toreplytoamessage:

1.Display or highlight a read message and press Reply (left softkey). (To reply to the sender and all recipients, press / > Reply All.)

2.Select [Create Reply] and enter a reply message or select a short reply from the list.

3.Edit any applicable message fields and press r.

4.Press Send (left softkey).

Tip: To create new reply phrases to use in later reply messages, see “Quick Notes and Reply Phrases” on page 76.

Note: If the message you are replying to was sent with auto replies, it contains a numbered list of possible replies. Press the number of a reply. The reply is sent immediately without any further action.

MoreWaystoBeginaMessage

In addition to beginning a message from the Message Center, you can begin a message from Contacts, the Recent Calls list, standby mode, or the Media Center.

Tobegin amessagefromContacts:

1.From the Contacts list, highlight an entry.

2.Scroll left or right to view the Contacts types until you see the icon for the phone number or email address to which to send the message.

3.Press Create (left softkey) or press / > Create Message.

4.Create and send the message.

Tobegin amessagefromtheRecentCallslist:

1.From the Recent Calls list, highlight an entry.

Service Features

4. Service Features: The Basics 53