![](/images/new-backgrounds/1205272/205272113x1.webp)
To edit an existing Bridge Filter Rule, click the radio button adjacent to the Filter Rule name. The Rule will then appear in the top half of the Bridge Filter control screen where it can be edited. When editing is complete, click ‘Add’ to return the Rule to the list of existing rules.
To delete Bridge Filter Rules, click on the ‘Delete’ tick box; multiple deletions can be made by
To save changes, click on Apply.
Hidden Bridge Filter Rules
The Bridge filter table contains three hidden rules. These rules are built into the Router to ensure the user does not become locked out by entering a rule which prevents further access to the router.
The first rule allows any and all ARP frames through the system.
The second rule allows all IPv4 frames with the destination Bridge address of the bridge to go through.
The third rule allows all IPv4 frames with the source MAC address of the bridge to go through.
TIP: | To find the MAC address of a |
| type: ipconfig /all. |
Advanced > Multicast
IGMP [=Internet Group Management Protocol] Multicast enables communication
YML754 Rev1 | NB5Plus4/W User Guide |
www.netcomm.com.au | 57 |