Nortel Networks NB5PLUS4/W manual NB5Plus4W Antenna Instructions, Bend the antenna to a 90o angle

Models: NB5PLUS4/W

1 112
Download 112 pages 29.13 Kb
Page 15
Image 15

NB5Plus4W Antenna Instructions

Before continuing with the Hardware installation, you may need to connect the Antenna

1.The antenna has a retaining nut which must be screwed into the SMA connector on the back of the modem. Place the screw retaining nut over the antenna con- nection on the rear of the NB5Plus4W and turn it clockwise.

Note:

Do not over-tighten the attaching nut - but do make sure that you have

 

screwed it all the way to its end.

Screw retaining

nut clockwise

over the antenna

connection

Bend antenna to a 90o angle

2. Bend the antenna to a 90o angle.

Note: Please note that you may have to rotate the complete antenna assembly to do this and have the antenna pointing vertically.

YML754 Rev1

NB5Plus4/W User Guide

www.netcomm.com.au

15

Page 15
Image 15
Nortel Networks NB5PLUS4/W manual NB5Plus4W Antenna Instructions, Bend the antenna to a 90o angle