CAUTION: Any changes you make to the WLAN screen do NOT get saved auto- matically. Clicking on the ‘Apply’ button on the individual page is not sufficient for the changes you made to take effect. For change(s) you made to any WLAN screen to take effect, you will need to perform these steps.
1.Click the Apply button.
2.Click the Restart Access Point link at the bottom of the page, which will take you to the System Commands screen.
Note: An alternative way to access the System Commands Screen to click on the Tools tab, then select the System Commands option.
3.On the System Commands Screen, click Save All. This will save all the changes you have made. You will still need to restart the access point for any changes to take effect.
4.If you only made changes to the WLAN setting(s), click the Restart Access Point button for the changes to take effect. OR
5.If you also made changes to the DSL setting(s), click the Restart button for all changes to take effect.
Wireless>Configuration
You can access the Configuration screen by clicking on the Configuration link. This screen provides an advanced wireless network parameter settings.
Following is a description of the Wireless Configuration fields:
Option | Description |
Beacon Period | The time interval between beacon frame |
| transmissions, which ranges from 0 - |
| 65535 msec. |
DTIM period | Delivery Traffic Identification Map |
YML754 Rev1 | NB5Plus4/W User Guide |
www.netcomm.com.au | 1 |
