■"Restricted User" is the user in User Configuration without administration permission. The user can be configured to have limited permission to see video, for example, "capable of changing video size, etc".
■"Administrator User" is the user in User Configuration with administration permission. The user has all permission to operate the NETCOMM NS4540, such as managing, configur- ing, and upgrading the software.
6-1-2-2 Add New User
■Name: New user name to login
■Password: Password for above user
■Confirm Password: Type again to confirm password
■Permission to: Indicates above user has any permission
■Administration: If no, then user can't enter administration page.
Note: | that the first user shall set and obtain administration privileges; otherwise, he/ |
| she will not be able to access the administration page any more. If this occurs, |
| he/she must use the emergency factory default to reset all users. |
Change Video Size: If no, only CIF size is allowed.
PTZ Control on Channel 1: Permissions to do PTZ control.
■Submit to add above new user into list
■Cancel to abort above operation
When entering "submit" for the first time, the NETCOMM NS4540 will ask for a new administrator to login in. Once the user has been entered in list, you could choose users in list to make modifications (update), or remove specified users. Click "Save Changes" button if you have changed existing data in the NETCOMM NS4540 before power off.
YML7** Rev1 | NetComm NS4540 Dome Camera User Guide |
www.netcomm.com.au | 35 |
