Message | Meaning | What to Do | |
|
|
|
|
CHECK BELT | The belt unit is not | Open the top cover and | |
330: BELT MISSING | properly installed. | lift out the black (K) and | |
|
| Yellow (Y) image | |
|
| drums, placing them on | |
|
| a flat surface. Check to | |
|
| be sure that the belt | |
|
| unit latches are fully in | |
|
| the latched position: | |
|
|
|
|
|
| then reinstall the image |
|
| drums. |
CHECK FUSER | The fuser unit is not | Open the top cover and |
320: FUSER MISSING | properly installed. | check to be sure that |
|
| the fuser unit is |
|
| properly seated in the |
|
| printer and that the lock |
|
| levers are pushed all |
|
| the way toward the |
|
| back of the printer: |
CHECK MP TRAY | Paper has jammed | Clear the jam: see |
390: PAPER :JAM | while exiting the MP | |
| Tray. | |
|
|
|
Troubleshooting • 122