| Parallel Menu | |
Note: Factory default settings are shown in bold. | ||
|
|
|
Item | Settings | Explanation |
|
|
|
PARALLEL | ENABLE | Enables or disables the parallel port. |
| DISABLE |
|
|
|
|
ENABLE | Enables or disables | |
| DISABLE | functionality of the parallel port. |
|
|
|
ECP | ENABLE | Enables or disables ECP mode. |
| DISABLE |
|
|
|
|
ACK WIDTH | NARROW | Sets width of ACK signal in compatible |
| MEDIUM | receiving: |
| WIDE | • Narrow = 0.5 µS |
|
| • Medium = 1.0 µS |
|
| • Wide = 3.0 µS |
|
|
|
ACK/BUSY | ACK IN | Sets the order in which the BUSY signal is |
TIMING | BUSY | output. |
| ACK WHILE | • ACK IN BUSY = BUSY goes low at end |
| BUSY | of ACK pules. |
|
| • ACK WHILE BUSY = BUSY goes low at |
|
| centre of ACK pulse. |
|
|
|
3 MICRO SEC | Sets the time interval to enable/disable | |
| 50 MICRO SEC | the |
| DISABLE |
|
OFF LINE | DISABLE | Enable = maintains reception without |
RECEIVE | ENABLE | changing the interface signal, even |
|
| though an alarm occurs. The interface |
|
| stays open even if the ON LINE button is |
|
| pressed. |
|
| The interface issues a BUSY signal only |
|
| when the receive buffer is full. |
|
|
|
Menu Functions • 58