Parallel Transmission Mode: Windows Only
The parallel port supports
To correct for this, enter the printer's Parallel Menu and change the ECP setting to Disable.
READY | ON LINE |
|
BACKENTER
ATTENTION
MENUCANCEL
1.Press + to enter the Menu mode.
2.Press – repeatedly until you see
PARALLEL MENU
3.Press ENTER.
PARALLEL
ENABLE*
4.Press ENTER.
The second line of the display starts blinking.
5.Press + to change the setting to Disable.
6.Press ENTER, then BACK to engage the setting.
7.Press ON LINE.
Troubleshooting • 138