Printing is slow.
Possible cause | Remedy |
|
|
Print resolution is | Set lower print resolution in the printer d6 |
set high. |
|
Data is too complex. Simplify data.
Printer requests paper size change to continue printing.
Possible cause
Paper loaded in tray is different size from that formatted in software application.
Remedy
Either change paper in tray to match size formatted in application and press ON LINE to continue, or continue printing on existing paper by pressing ON LINE.
The power is on, but the printer does not go online.
Possible cause | Remedy |
|
|
Bad connection | Switch off the printer and disconnect the power |
| cable. Reconnect the power cable and switch the |
| printer on. If this does not clear the fault, call for |
| service. |
|
|
Print processing does not start. | |
|
|
Possible cause | Remedy |
|
|
Printer error | Check the control panel. If an error message is |
| displayed, correct the problem. |
|
|
Print processing cancels. | |
|
|
Possible cause | Remedy |
|
|
The printer interface | Replace the printer interface cable. |
cable is faulty. |
|
|
|
The time out setting is | Reset time out in the menu to a higher value |
too short. | (SYS CONFIG MENU →WAIT TIMEOUT). |
|
|
Troubleshooting • 129