4.Click the Device Options tab. In the Printer features list (1), click

Job Type, then select Store to HDD under Change settings (2).

5.Enter your 4-digit password (0000 to 9999): In the Printer features list, click PASSWORD1, then select the value of your choice for that digit under Change setting. Repeat the process for each digit of the password, making note of the number you entered.

6.For collated printing, scroll down under Printer features and change the setting for Collate to Yes.

7.Click OK.

8.Click OK.

The document is processed to a print file and stored on the printer’s hard disk drive.

9.Go to the printer and print out the document using the front panel (see below).

Windows: Postscript Emulation Driver • 238