Cannot configure for USB connection.
NOTE
Windows 95 and NT 4.0 do not support USB; Windows 98 upgraded from Windows 95 may not support USB.
Possible cause | Remedy | ||||
|
|
|
|
|
|
USB cable does not meet | Use USB cable to specification Ver.1.1. | ||||
specifications. |
|
|
|
|
|
|
|
|
|
|
|
Interface is disabled. | Check that USB interface is set to Enable in | ||||
| the menu (USB MENU →USB →ENABLE). | ||||
|
|
|
|
|
|
Configuration procedure | Configure again from the beginning. | ||||
was not correctly |
|
|
|
|
|
followed or cancelled. |
|
|
|
|
|
|
|
|
|
|
|
USB cable is | Reconnect or try another cable. | ||||
disconnected or faulty. |
|
|
|
|
|
|
|
|
|
|
|
A USB hub is being used. | The printer cannot be used with a USB hub. | ||||
| Connect the printer and computer directly. | ||||
|
|
|
|
|
|
The USB cable is | Make sure the USB cable is plugged into the | ||||
installed in the Ethernet | black USB port (1) on the printer: | ||||
port. |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Troubleshooting • 131